EDGE AI PC APQ TER30J-B3
Njikwa ime obodo
Nlekota ọnọdụ
Ọrụ na mmezi n'ime ime obodo
Njikwa Nchekwa
KPỌTỤRỤ ANYỊ| Ụdị nlereanya | TER30J-B3 | ||
| Modulu Isi | Jetson AGX Orin 32GB, 200 TOPS | Jetson AGX Orin 64GB, 275 TOPS | |
| Ethernet | Onye njikwa | 1 * Marvell®AQR113C,10/100/1000/2500/5000/10000 Mbps | |
| 1 * Marvell®88E1512,10/100/1000 Mbps | |||
| 2 * Intel®i226-V/LM,10/100/1000/2500 Mbps | |||
| Nchekwa | M.2 | 1 * M.2 Key-M Slot (NVMe SSD, 2280) | |
| TF | 1 * Oghere Kaadị TF | ||
| Oghere Mgbasawanye | M.2 | 1 * M.2 Key-B Slot (USB 5Gbps + USB 2.0, 3052, nwere oghere kaadị SIM Nano 1 *) | |
| 1 * M.2 Key-E Slot (PCIe x1 + USB 2.0) | |||
| I/O nke ihu | Ethernet | 1 * 10GbE (RJ45) | |
| 2 * GbE (RJ45) | |||
| USB | 3 * USB 10Gbps (Ụdị-A) | ||
| 5 * USB 5Gbps (Ụdị-A) | |||
| Ngosipụta | 1 * HDMI: Mkpebi ya ruru 4096*2304@30Hz (Ụdị-A) | ||
| LED | 1 * Ọkwa Sistemụ LED | ||
| Bọtịnụ | 1 * Bọtịnụ Ike + LED Ike | ||
| 1 * Bọtịnụ Tọgharia Sistemụ | |||
| 1 * Bọtịnụ mgbake Sistemụ | |||
| Ntinye Ike | 1 * Ntinye Ike (2P, P=5.00/5.08, Ngọngọ Njikọ) | ||
| Akụkụ I/O | OTG | 1 * USB 2.0 (Ụdị-C, ọdụ ụgbọ mmiri na-enwu enwu) | |
| Debughụ | 1 * USB 2.0 (Ụdị-C, ọdụ ụgbọ mmiri debug) | ||
| TF | 1 * Oghere Kaadị TF | ||
| SIM | 1 * Oghere kaadị SIM Nano | ||
| I/O dị n'ime | Ihu Panel | 1 * Panel Ihu (Ike + Tọgharịa + Mgbake, wafer) | |
| Ịkwado ebe a na-adọba ụgbọala | Ethernet (88E1512) + Debug (Uart) + OTG (USB 2.0) + GPIO | ||
| Onye ofufe | 1 * Sistemụ Fan (wafer) | ||
| GPIO | GPIO 8bit (OS nwere ike ịhazi DI/DO na H/L, wafer) | ||
| Usoro Ihe Nlereanya | 2 * RS232/485 (Mgbanwe Jumper, wafer) | ||
| 1 * TTL (wafer) | |||
| Ọdịyo | 1 * Ọdịyo (Line_Out + Igwe okwu) (wafer) | ||
| Ịnye ọkụ | Ụdị | AT/ATX | |
| Voltaji Ntinye Ike | 12 ~ 28V DC | ||
| njikọ | 1 * Njikọ Ntinye Ike (2P, P=5.08mm, Ngọngọ Njikọ) | ||
| Batrị RTC | Mkpụrụ ego CR2032 | ||
| Nkwado OS | Linux | Jetpack6.2 (Ubuntu22.04) | |
| Mekaniki | Ihe e ji kpuchie ogige | Aluminom alloy | |
| Akụkụ | 118.2mm(L) * 130mm(W) * 57.6mm(H) | ||
| Ịwụnye | Ntinye ihe nkwado | ||
| Gburugburu Ebe Obibi | Sistemụ Mgbasa Okpomọkụ | Ọkụ na-arụ ọrụ nke ọma | |
| Okpomọkụ Ọrụ | -20~50℃ (SSD ụlọ ọrụ mmepụta ihe) | ||
| Okpomọkụ Nchekwa | -40~80℃ (SSD ụlọ ọrụ mmepụta ihe) | ||
| Iru mmiri dị nso | 10 ruo 95% RH (anaghị agwakọta) | ||
| Ịma jijiji n'oge ọrụ | 3Grms@5~500Hz, enweghị usoro, 1hr/axis | ||
| Ujo mgbe a na-arụ ọrụ | 15G, ọkara sine, 11ms, ±X/Y/Z, ihe mberede atọ/axis | ||
Nha Ngwaahịa
Ngwaahịa I/O
Nweta ihe nlereanya
Dị irè, dị nchebe ma dịkwa ntụkwasị obi. Ngwaọrụ anyị na-ekwe nkwa azịza ziri ezi maka ihe ọ bụla achọrọ. Rite uru site na ahụmịhe ụlọ ọrụ anyị ma mepụta uru agbakwunyere - kwa ụbọchị.
Pịa maka ajụjụ
